Page 1 of 1

which ECU for K24a2 swap

Posted: Fri Jan 04, 2019 6:34 pm
by crxrich_kid
I'm putting a k24a2 into a 93 Civic Hatch. If I use an Element harness and 2005 Accord ECU, can that Accord ECU be reflashed to properly run a basically stock k24a2. Or, is it possible to have the 2006 TSX automatic ECU reflashed (or would it not work with Element harness)? I want the immobilizer disabled and most importantly, this is a budget build. So only basic components to get it running will be added...... cable TB, kswap header etc.

Re: which ECU for K24a2 swap

Posted: Fri Jan 04, 2019 7:45 pm
by KTuner
2005 Accord ECUs do not have a CEL output. It will work if you don't care about CEL. You'd be better off getting a KTunerSWAP ECU or PRB. There's a basemap for the TSX engine using PRB codebase right in the software.