KTuner.com

Was going to go k pro but to expensive at this time, what engine harness and ecu would i use to get this running off a reflash ? And i got the xenoncron immobilizer bypass so not worried about that blinking light any help would be greatly appreciated and a price estimate on the flash would be help too.

Turbo97coupe

For something custom like this you'll want the end user kit. I do not recommend a reflash alone.

What engine harness should i use and what ecu so i can buy them need my car running and need reverse lockout as im running a 6 speed tranny. As of rite now im so confused with this program thats why i want specifics as to what engine harness and what ecu do i need. I have a 02 rsx type s harness so the reverse solenoid is already wired in

If you already have the 02-04 harness and want to use it you can get the 02-04->05-06 conversion harness to use the newer ECU with the older harness. When you purchase the end user kit you can get an ECU with it, or check the part numbers on the swap page for usable part numbers to search for.

So any 05-06 ecu compatable with you program will run my motor perfect, and i need a 04 to 05-06 adapter harness

Yes, you will also need the 05-06 style O2 Sensor available at Xenocron.com. There are several RSXs and Accords with TSX swaps running with KTuner. You will need tuning, but there are some basemaps.

Does norris prayonto tune this program? Can you give me a list of maryland, virginia tuners who tune your program. Like i know for awhile only 2 people tuned aem

People who tune the program don't normally tell us about it unless they become a dealer. Our dealers are on the dealer page.

Thanks hopfully atleast one is in MD or VA