Page 4 of 6

Re: Ask your KTuner Reflash questions

Posted: Fri Aug 25, 2017 6:40 pm
by KTuner
Sounds good.

quick 2 questions on provided tunes in End User Kit....

Posted: Mon Oct 09, 2017 8:13 pm
by vctaillon
:D
quick 2 questions on provided tunes in End User Kit....

the descriptions are pretty clear just wondering what's the raw performance difference between "Stage 0, 1, 2" and "Starter 16.5, 18, 21 PSI" ? Starter is improved launching only ? Seems and I'm guessing here :lol: "Stage 0, 1, 2" is written out with more refined raw performance and the other might be scaled back a bit. I guess I'd have to try them all to see, feel etc......
:roll:

And is there a way to see the breakdown of each reflash tune and see what it does ?

I just jumped right in and got Stage 1 installed on 17 EXT HB CVT and it's turned up quite a bit from stock for now ;).

Re: Ask your KTuner Reflash questions

Posted: Mon Oct 09, 2017 10:24 pm
by KTuner
Starters leave all adjustment level options, like turbo responsiveness and spool, up to you.

Re: Ask your KTuner Reflash questions

Posted: Mon Oct 09, 2017 11:50 pm
by vctaillon
KTuner wrote:Starters leave all adjustment level options, like turbo responsiveness and spool, up to you.
so you open up the tune and you can change settings but you have to have "saved as" first...
I guess I'm not clear on the edit tune procedure.

OK, so is there a way I can "see" the adjustment options for instance on my current stage 1 tune even if I didn't save it first ?

Re: Ask your KTuner Reflash questions

Posted: Tue Oct 10, 2017 12:24 am
by KTuner
You can edit any open tune. You should save a copy, but that's on you.

You can't see the staged tunes.

Re: Ask your KTuner Reflash questions

Posted: Tue Oct 31, 2017 8:20 pm
by hylander
Once I order my end user rev 1 Ktuner for '05 RSX Type S with reflash 1 on it, are the other reflashes, #2, and #3 readily available in the software to locate and reflash the ECU? And, once I have a PLM race header and Skunk2 KPRO Series Intake manifold 70 mm port with matching throttle body, will the vehicle run better with reflash #2 , or #3, since it is not an RBC Intake manifold. If #2 is the better choice, how do I obtain a basemap for the aforementioned bolt ons to optimize best performance? Thanks.

Re: Ask your KTuner Reflash questions

Posted: Tue Oct 31, 2017 8:32 pm
by KTuner
All of our basemaps are built into the software as outlined in our tutorial videos.

Re: Ask your KTuner Reflash questions

Posted: Tue Nov 28, 2017 11:27 pm
by JPool
Is reflash #2 supposed to be used with race headers or shorty headers?

Re: Ask your KTuner Reflash questions

Posted: Wed Nov 29, 2017 12:09 pm
by KTuner
A header which increases exhaust flow should be used.

Re: Ask your KTuner Reflash questions

Posted: Sat Jul 28, 2018 6:09 pm
by thejackal1963
hello i am new to this forum, i have a 2018 honda crv ex-l with a 1.5l turbo , will the v2 work with this model? thank you