which ECU for K24a2 swap

which ECU for K24a2 swap

Postby crxrich_kid » Fri Jan 04, 2019 6:34 pm

I'm putting a k24a2 into a 93 Civic Hatch. If I use an Element harness and 2005 Accord ECU, can that Accord ECU be reflashed to properly run a basically stock k24a2. Or, is it possible to have the 2006 TSX automatic ECU reflashed (or would it not work with Element harness)? I want the immobilizer disabled and most importantly, this is a budget build. So only basic components to get it running will be added...... cable TB, kswap header etc.
Posts: 1
Joined: Fri Jan 04, 2019 6:28 pm

Re: which ECU for K24a2 swap

Postby KTuner » Fri Jan 04, 2019 7:45 pm

2005 Accord ECUs do not have a CEL output. It will work if you don't care about CEL. You'd be better off getting a KTunerSWAP ECU or PRB. There's a basemap for the TSX engine using PRB codebase right in the software.
Site Admin
Posts: 1529
Joined: Mon Jul 22, 2013 8:13 pm

Return to KTuner Reflash

Who is online

Users browsing this forum: No registered users and 1 guest