Ask your KTuner Reflash questions

Re: Ask your KTuner Reflash questions

Postby KTuner » Fri Aug 25, 2017 6:40 pm

Sounds good.
KTuner
Site Admin
 
Posts: 1451
Joined: Mon Jul 22, 2013 8:13 pm

quick 2 questions on provided tunes in End User Kit....

Postby vctaillon » Mon Oct 09, 2017 8:13 pm

:D
quick 2 questions on provided tunes in End User Kit....

the descriptions are pretty clear just wondering what's the raw performance difference between "Stage 0, 1, 2" and "Starter 16.5, 18, 21 PSI" ? Starter is improved launching only ? Seems and I'm guessing here :lol: "Stage 0, 1, 2" is written out with more refined raw performance and the other might be scaled back a bit. I guess I'd have to try them all to see, feel etc......
:roll:

And is there a way to see the breakdown of each reflash tune and see what it does ?

I just jumped right in and got Stage 1 installed on 17 EXT HB CVT and it's turned up quite a bit from stock for now ;).
Last edited by vctaillon on Mon Oct 09, 2017 11:42 pm, edited 1 time in total.
vctaillon
 
Posts: 22
Joined: Mon Oct 09, 2017 2:25 am

Re: Ask your KTuner Reflash questions

Postby KTuner » Mon Oct 09, 2017 10:24 pm

Starters leave all adjustment level options, like turbo responsiveness and spool, up to you.
KTuner
Site Admin
 
Posts: 1451
Joined: Mon Jul 22, 2013 8:13 pm

Re: Ask your KTuner Reflash questions

Postby vctaillon » Mon Oct 09, 2017 11:50 pm

KTuner wrote:Starters leave all adjustment level options, like turbo responsiveness and spool, up to you.


so you open up the tune and you can change settings but you have to have "saved as" first...
I guess I'm not clear on the edit tune procedure.

OK, so is there a way I can "see" the adjustment options for instance on my current stage 1 tune even if I didn't save it first ?
vctaillon
 
Posts: 22
Joined: Mon Oct 09, 2017 2:25 am

Re: Ask your KTuner Reflash questions

Postby KTuner » Tue Oct 10, 2017 12:24 am

You can edit any open tune. You should save a copy, but that's on you.

You can't see the staged tunes.
KTuner
Site Admin
 
Posts: 1451
Joined: Mon Jul 22, 2013 8:13 pm

Re: Ask your KTuner Reflash questions

Postby hylander » Tue Oct 31, 2017 8:20 pm

Once I order my end user rev 1 Ktuner for '05 RSX Type S with reflash 1 on it, are the other reflashes, #2, and #3 readily available in the software to locate and reflash the ECU? And, once I have a PLM race header and Skunk2 KPRO Series Intake manifold 70 mm port with matching throttle body, will the vehicle run better with reflash #2 , or #3, since it is not an RBC Intake manifold. If #2 is the better choice, how do I obtain a basemap for the aforementioned bolt ons to optimize best performance? Thanks.
hylander
 
Posts: 1
Joined: Tue Oct 31, 2017 8:11 pm

Re: Ask your KTuner Reflash questions

Postby KTuner » Tue Oct 31, 2017 8:32 pm

All of our basemaps are built into the software as outlined in our tutorial videos.
KTuner
Site Admin
 
Posts: 1451
Joined: Mon Jul 22, 2013 8:13 pm

Re: Ask your KTuner Reflash questions

Postby JPool » Tue Nov 28, 2017 11:27 pm

Is reflash #2 supposed to be used with race headers or shorty headers?
JPool
 
Posts: 1
Joined: Tue Nov 28, 2017 11:25 pm

Re: Ask your KTuner Reflash questions

Postby KTuner » Wed Nov 29, 2017 12:09 pm

A header which increases exhaust flow should be used.
KTuner
Site Admin
 
Posts: 1451
Joined: Mon Jul 22, 2013 8:13 pm

Re: Ask your KTuner Reflash questions

Postby thejackal1963 » Sat Jul 28, 2018 6:09 pm

hello i am new to this forum, i have a 2018 honda crv ex-l with a 1.5l turbo , will the v2 work with this model? thank you
thejackal1963
 
Posts: 1
Joined: Sat Jul 28, 2018 6:04 pm

PreviousNext

Return to KTuner Reflash

Who is online

Users browsing this forum: No registered users and 1 guest

cron