KTuner.com

I also have the conversion harness for the ecu from Boomslang. I forgot to mention that.

Hi! I’ve wired in the can harness from hondata and will use a compatible 07 TL ecu. Is there a starting point / basemap for the J30a4 engine or is it just the J32? I wanted to ask before I sync the immo to the new ecu. If there’s not a map it’ll take me a weekend to tune it. If there’s a map I can d...

Is the fuel injectors delay calculated off the voltage in the logs? My logs say I’m running 14.1 volts so I wanted to make sure it’s running a delay according to the 14 volts on the fuel injector delay setting. I’m running a piggy back Ecuador’s to increase boost and I need to know which injector de...

Thank you!

Thank you!

For Main Fuel Trim and Cylinder Correction Fuel Trim, is that value the percentage between the old and new injectors, or is it CC capacity?

For my tune that's setup for 310cc and RDX 410cc, that's a 27% increase.

Would 27 (percent) go in the field or 100 (difference in CC)?

Thanks!
- Jason

Hi!
I see the Fuel and Ignition have boost columns but these don't:
- Knock Retard
- Knock Limit
- WOT Enrichment
- WOT Enrichment Cat Heating

Knock Limit Knock Retard WOT Enrichment WOT Enrichment Cat Heating

Ok, I re-read it, took a look at my logs with actual ignition, and got some good ol' pen and paper and makes more sense now you I know the value of 2 is just an example. One other thing, I noticed there's no boost table visible for my Fit. Is that something that can be added or is the last value (.0...

I did read it but it is still confusing.

How did you get the "knock limitation table value" to 2.0 in the example?

In the example picture, the only value with 2.0 is at MAP .2bar @ 5000 rpm.

Would I set the Knock Retard table to 0 negate it? Or would setting to 5 compensate the the control value of .50?

Also, what happens if I do have a knock? I thought the car would pull timing if knock is detected by default.

Thanks!
- Jason