Search found 39 matches
- Wed Aug 18, 2021 10:56 pm
- Forum: 07-08 TL Specific
- Topic: Starting point for 03-07 Accord v6-6MT J30a4
- Replies: 4
- Views: 6233
Re: Starting point for 03-07 Accord v6-6MT J30a4
I also have the conversion harness for the ecu from Boomslang. I forgot to mention that.
- Wed Aug 18, 2021 10:55 pm
- Forum: 07-08 TL Specific
- Topic: Starting point for 03-07 Accord v6-6MT J30a4
- Replies: 4
- Views: 6233
Starting point for 03-07 Accord v6-6MT J30a4
Hi! I’ve wired in the can harness from hondata and will use a compatible 07 TL ecu. Is there a starting point / basemap for the J30a4 engine or is it just the J32? I wanted to ask before I sync the immo to the new ecu. If there’s not a map it’ll take me a weekend to tune it. If there’s a map I can d...
- Mon Jul 06, 2020 6:14 pm
- Forum: 09-10 Fit
- Topic: Injector Delay and Voltage
- Replies: 1
- Views: 5685
Injector Delay and Voltage
Is the fuel injectors delay calculated off the voltage in the logs? My logs say I’m running 14.1 volts so I wanted to make sure it’s running a delay according to the 14 volts on the fuel injector delay setting. I’m running a piggy back Ecuador’s to increase boost and I need to know which injector de...
- Sat Sep 21, 2019 12:20 am
- Forum: 09-10 Fit
- Topic: Boost Tables for Knock Retard, Limit, and WOT Enrichment
- Replies: 2
- Views: 6530
- Sat Sep 21, 2019 12:20 am
- Forum: 09-10 Fit
- Topic: Knock Control only goes down to .50
- Replies: 8
- Views: 11159
Re: Knock Control only goes down to .50
Thank you!
- Sat Sep 21, 2019 12:19 am
- Forum: 09-10 Fit
- Topic: Fuel Injector Scaling
- Replies: 7
- Views: 11409
Re: Fuel Injector Scaling
For Main Fuel Trim and Cylinder Correction Fuel Trim, is that value the percentage between the old and new injectors, or is it CC capacity?
For my tune that's setup for 310cc and RDX 410cc, that's a 27% increase.
Would 27 (percent) go in the field or 100 (difference in CC)?
Thanks!
- Jason
For my tune that's setup for 310cc and RDX 410cc, that's a 27% increase.
Would 27 (percent) go in the field or 100 (difference in CC)?
Thanks!
- Jason
- Fri Sep 20, 2019 6:42 pm
- Forum: 09-10 Fit
- Topic: Boost Tables for Knock Retard, Limit, and WOT Enrichment
- Replies: 2
- Views: 6530
Boost Tables for Knock Retard, Limit, and WOT Enrichment
Hi!
I see the Fuel and Ignition have boost columns but these don't:
- Knock Retard
- Knock Limit
- WOT Enrichment
- WOT Enrichment Cat Heating
Knock Limit Knock Retard WOT Enrichment WOT Enrichment Cat Heating
I see the Fuel and Ignition have boost columns but these don't:
- Knock Retard
- Knock Limit
- WOT Enrichment
- WOT Enrichment Cat Heating
Knock Limit Knock Retard WOT Enrichment WOT Enrichment Cat Heating
- Fri Sep 20, 2019 4:51 pm
- Forum: 09-10 Fit
- Topic: Knock Control only goes down to .50
- Replies: 8
- Views: 11159
Re: Knock Control only goes down to .50
Ok, I re-read it, took a look at my logs with actual ignition, and got some good ol' pen and paper and makes more sense now you I know the value of 2 is just an example. One other thing, I noticed there's no boost table visible for my Fit. Is that something that can be added or is the last value (.0...
- Fri Sep 20, 2019 3:41 pm
- Forum: 09-10 Fit
- Topic: Knock Control only goes down to .50
- Replies: 8
- Views: 11159
Re: Knock Control only goes down to .50
I did read it but it is still confusing.
How did you get the "knock limitation table value" to 2.0 in the example?
In the example picture, the only value with 2.0 is at MAP .2bar @ 5000 rpm.
How did you get the "knock limitation table value" to 2.0 in the example?
In the example picture, the only value with 2.0 is at MAP .2bar @ 5000 rpm.
- Fri Sep 20, 2019 2:19 pm
- Forum: 09-10 Fit
- Topic: Knock Control only goes down to .50
- Replies: 8
- Views: 11159
Re: Knock Control only goes down to .50
Would I set the Knock Retard table to 0 negate it? Or would setting to 5 compensate the the control value of .50?
Also, what happens if I do have a knock? I thought the car would pull timing if knock is detected by default.
Thanks!
- Jason
Also, what happens if I do have a knock? I thought the car would pull timing if knock is detected by default.
Thanks!
- Jason