Search found 42 matches
- Fri Mar 12, 2021 4:34 am
- Forum: General Hardware Questions
- Topic: ECU Resetting Itself While Driving
- Replies: 12
- Views: 17813
Re: ECU Resetting Itself While Driving
I have same issue on my 0607 accord in-ecu board from I bought it on 2018, I use 0607 RAD factory AT basemap from software and also posted on specific forum board but not solved, so I stopped to use it from that time and keep watching the forum for solution for quite long time.
- Sun Nov 15, 2020 5:52 am
- Forum: General Hardware Questions
- Topic: K-TUNER IN ECU issue
- Replies: 5
- Views: 9829
Re: K-TUNER IN ECU issue
Hi,i have little strange problem.Sometime when i start engine and turn immeditaley ecu reset for very little time of second.Car stick for moment and ignition again.I hear only relay underdash fast tickling same when i reset ecu manually.Not every day,may be one two times in month.I have remote part...
- Sun Nov 15, 2020 5:52 am
- Forum: General Hardware Questions
- Topic: K-TUNER IN ECU issue
- Replies: 5
- Views: 9829
Re: K-TUNER IN ECU issue
Have you solve it now? I have same ecu reset problem with you and also hearing underdash relay tickling on my 06 accord in-ecu.
- Tue Apr 23, 2019 11:45 pm
- Forum: 06-07 Accord Specific
- Topic: 07 accord CM5 tuning options
- Replies: 38
- Views: 49794
Re: 07 accord CM5 tuning options
HI Kt I need your help on assessing my idle issue. After stop when I swith from D to N or P. idle RPM suddenly drop to less than 600 RPM (I set 800 RPM in calibration) for 2 seconds and then back to 800. At the time I saw below things, and I also confirmed idle learn procedure finished: >>>MAP drops...
- Tue Apr 16, 2019 3:51 am
- Forum: 06-07 Accord Specific
- Topic: 07 accord CM5 tuning options
- Replies: 38
- Views: 49794
Re: 07 accord CM5 tuning options
Hi Kt
Inject size setting in the calibration come from your software for K24A8 is set to 310cc which was knew as 270cc, do I need to modify this if I am running a K24A2 stock? And what should be injector dead time setting for my application?
Inject size setting in the calibration come from your software for K24A8 is set to 310cc which was knew as 270cc, do I need to modify this if I am running a K24A2 stock? And what should be injector dead time setting for my application?
- Mon Oct 08, 2018 10:18 pm
- Forum: 06-07 Accord Specific
- Topic: 07 accord CM5 tuning options
- Replies: 38
- Views: 49794
Re: 07 accord CM5 tuning options
It did not take effect on P or N as the datalog.KTuner wrote:You mentioned you already had, and those are the only target tables available.
- Sat Oct 06, 2018 11:37 pm
- Forum: 06-07 Accord Specific
- Topic: 07 accord CM5 tuning options
- Replies: 38
- Views: 49794
Re: 07 accord CM5 tuning options
ok lets only talk on P and N.KTuner wrote:Again, because load has been introduced. I don't think you caught that.
How can I set idle of P to 700 RPM. Just let me know this , thanks.
- Fri Oct 05, 2018 11:22 pm
- Forum: 06-07 Accord Specific
- Topic: 07 accord CM5 tuning options
- Replies: 38
- Views: 49794
Re: 07 accord CM5 tuning options
The idle target is the same in either mode, as you can clearly see the tables aren't labeled P D N etc. Please read my post again to see if it now makes sense. Hi my friend The problem is they are not the same as you said. idle is 700 on D and 800 on P when setting 700 in kcl. if set 800 in kcl, id...
- Thu Oct 04, 2018 10:50 pm
- Forum: 06-07 Accord Specific
- Topic: 07 accord CM5 tuning options
- Replies: 38
- Views: 49794
Re: 07 accord CM5 tuning options
In D there is load on the engine. P and N there's not. It should reach your target, though. Please read again my statement. The circumstance is on P it is 800 not as expected 700. On D with breaking it drops to 700 as set in calibration. I assume correct logic should be idle of P is a target idle a...
- Wed Oct 03, 2018 12:26 pm
- Forum: 06-07 Accord Specific
- Topic: 07 accord CM5 tuning options
- Replies: 38
- Views: 49794
Re: 07 accord CM5 tuning options
There is a forced induction starting point that you would choose in order to start with forced induction. Hi Ktuner, the normal idle speed change did not take effect when I change it to lower than 800. After change the normal idle to 700, on P or N it is still 800, but at D with breaking it went to...