Search found 40 matches
- Mon Aug 07, 2017 12:50 pm
- Forum: 05-06 RSX Specific
- Topic: high idle
- Replies: 13
- Views: 18059
Re: high idle
You can watch in real-time the TPS value as it changes when you click the buttons. hello, I want to inform you that TPS calibration button doesn't work at all with '05 AT RSX PND ECU. I believe that TPS zero point just resets every time I turn the ignition on. when I've played with this feature usi...
- Wed Jan 25, 2017 4:07 pm
- Forum: 05-06 RSX Specific
- Topic: k24a2 long block
- Replies: 5
- Views: 8512
Re: k24a2 long block
OK, if I have a 05-06 base auto RSX - should I stick only with PND Auto basemaps as a starting point and tune from there, or other basemaps (PND MT, PRB, etc..) can be used too?
thank you
thank you
- Thu Jan 19, 2017 11:06 pm
- Forum: 05-06 RSX Specific
- Topic: high idle
- Replies: 13
- Views: 18059
Re: high idle
If the TPS value didn't change when you hit Calibrate 0 then your TPS is way out of spec. You'll need to adjust it physically. it's actually at 0.37V (7.5% absolute throttle position) when closed and sometimes I get TPS error codes. nevertheless, I've tried to play with throttle, opening it slightl...
- Sun Nov 13, 2016 10:46 pm
- Forum: 05-06 RSX Specific
- Topic: Knock Sensor
- Replies: 1
- Views: 4216
Re: Knock Sensor
check that Misfire Monitor is enabled in your firmware file.
- Fri Nov 11, 2016 1:45 pm
- Forum: 05-06 RSX Specific
- Topic: high idle
- Replies: 13
- Views: 18059
Re: high idle
of course this was done after loading my firmware file and connecting to the ECU. green bars at the bottom of KTuner window say "Connected" and "Live Settings".
I've tried to reupload the firmware after playing with the buttons but that doesn't change anything either.
I've tried to reupload the firmware after playing with the buttons but that doesn't change anything either.
- Fri Nov 11, 2016 1:41 pm
- Forum: General Questions
- Topic: Warranty? User Board Losing Functionality
- Replies: 7
- Views: 11865
Re: Warranty? User Board Losing Functionality
there's a cheap $1 fix for this problem. if your KTuner rev0 board doesn't start when it's cold outside, you can replace the U1 voltage regulator on the board with Texas Instruments UA78M05QDCYRQ1 . the one that's installed on the board is not rated for usage in cold ambient temps. https://pp.vk.me/...
- Fri Nov 11, 2016 1:40 pm
- Forum: 05-06 RSX Specific
- Topic: O2 sensor error codes/software update
- Replies: 12
- Views: 19380
Re: O2 sensor error codes/software update
the cause of the problem was low compression in two cylinders; I guess that O2 sensor was just flooded with unburned fuel. after rebuilding the engine the sensor works fine.KTuner wrote:Interesting. Keep me posted if the same thing occurs, though.
- Fri Nov 11, 2016 1:16 pm
- Forum: 05-06 RSX Specific
- Topic: high idle
- Replies: 13
- Views: 18059
Re: high idle
I've just tried that. when I click the buttons, the TPS value doesn't change at all.KTuner wrote:You can watch in real-time the TPS value as it changes when you click the buttons.
KTuner 1.0.4.2, rev0 board, PND ECU from 05 Base Auto RSX.
- Mon Oct 17, 2016 11:36 pm
- Forum: 05-06 RSX Specific
- Topic: high idle
- Replies: 13
- Views: 18059
Re: high idle
can you add some sort of UI feedback to TPS calibration? maybe show the saved TPS calibration value, etc..?KTuner wrote:Under main parameters.
Idle Target
TPS Calibration
now it seems like that these buttons essentially do nothing
- Thu Aug 18, 2016 10:38 am
- Forum: 05-06 RSX Specific
- Topic: Adjusting Idle rpm in KTuner
- Replies: 9
- Views: 16653
Re: Adjusting Idle rpm in KTuner
what is the purpose of removing the IACV?