KTuner.com

It's cuts around 2200-2500.

K20a2
Tps .45 closed 4.5/5.0 opened

Now if I gas the car quickly it's fine if I ease into it it fuel cuts sounds like 2 step my fuel cut settings what do I hange ?

Trans is a 02-04 6speed
No speed input what do I need to change in the map to make it functional idc about the speed it's not a street car.i just need vtec to engage ect

Ok so Ive loaded a basemap noticed I had a check engine light with 2 codes P0108 P0122 I've already bought a brand new map sensor . Funny thing is when I dont even have the tps plugged in it read 17% Map sensor reads 686 -how do I change this to vac even with plugged in or not I'm stumped ive tooken...

Who ever make the jumpers please please please label the e plug as there is two exact plugs I swapped them around mistake I've got it working now .can anyone help me out on my wideband its a mtx -l made by innovative .i have a yellow 0v or brown 1.1v analog output .which do I use for the ecu? And wh...

KTuner wrote:

k20ef_ wrote: Ktuner jumper harness 02/04 -05/06
02/04 ecu and engine harness

If you have an 02-04 ECU then the harness was never necessary.

Correction 05-06 ecu

Correction I have a 05-06 ecu from ktuner the end user kit

This is what the guy said who makes the conversio harness

I cross reference both ecu years and the wire is doing what it needs to do.the jumper harness is grounding out when not needed.someone please help my cars ready to start and I just need to get this resolved .

1990 Honda civic Phanetric conversion harness brand new Ktuner jumper harness 02/04 -05/06 02/04 ecu and engine harness On connector E pin 9 ign1 When I turn the key to on wire got so hot it melted the plastic around wire I cut the power as soon as I noticed . I'm stumped emailing the conversion har...