Step 2 - While your software is downloading you’ll need to lock the KTunerFlash V2 to your vehicle. To accomplish this:
Connecting the KTunerFlash V2 using the provided cables, connect the OBD2 cable to your KTunerFlash V2.
Once connected turn the vehicle's power on (Do Not Start). Follow the KTuner on-screen prompts
Once the KTuner is locked, unplug the unit and go back to your PC.
Step 3 - Installing the software. Once installed, you will be prompted to register. Be patient - it takes a few moments for the confirmation of registration.
Step 4 - You will see your vehicles’ Basemaps. Tweak as needed then save the map to a specific tune location. Use file names that make sense for you (My16psiBase, My16psiV1, etc). You don’t need to save a “Factory” map as this will be already loaded on your unit.
Step 5 - Go back to your vehicle and plug in the KTunerFlash V2. Select the map of choice by entering the KTuner menu and then the Flash menu. It will ask if you are sure you want to flash. Wait for the flash to complete. Enjoy!
IMPORTANT NOTES:
When driving with your KTunerFlash V2 be sure to route the cables as to not interfere with pedal or create a safety hazard.