This is a quick list of abbreviations you'll find when choosing items to monitor on the V2 display and in the software.
RPM - Revolutions Per Minute
MAP - Manifold Pressure
TC.Target - Turbo Charger Target(Not available on all platforms)
TC.Press - Turbo Charger Pressure (Not available on all platforms)
TPS - Throttle Position Sensor
TPS.C - Throttle Position Commanded
ECT 1&2 - Engine Coolant Temperature
IAT 1&2 - Intake Air Temperature
A.Ignition - Actual Ignition Output
Wideband - Factory Wideband Value
VSS - Vehicle Speed Sensor
CAM In.A - Intake CAM Position Actual
CAM In.C - Intake CAM Position Commanded
CAM Ex.A - Exhaust CAM Position Actual (Not available on all platforms)
CAM Ex.C - Exhaust CAM Position Commanded (Not available on all platforms)
Battery - Battery Voltage
K.Cont - Knock Control Value
K.Count - Knock Count
K.Cycle - Knock Control Cycle
K.Ret - Knock Retard Value
EWG.Duty - Electronic Wastegate Duty Cycle (Not available on all platforms)
EWG.Posi - Electronic Wastegate Position (Not available on all platforms)
EWG.Target - Electronic Wastegate Target Position (Not available on all platforms)
DIFPress - Direct Injection Fuel Pressure (Not available on all platforms)
DIFP.Target - Direction Injection Fuel Pressure Target (Not available on all platforms)
Ethanol - Ethanol Content (Not available on all platforms)
STFT 1&2 - Short Term Fuel Trim Bank 1 and Bank 2
LTFT 1&2 - Long Term Fuel Trim Bank 1 and Bank 2
FPS - Frames Per Second Refresh Rate
